FOLLOW THE INSTRUCTIONS BELOW TO LEARN HOW TO PROPERLY INSTALL, USE AND MAINTAIN YOUR CRYSTAL TIPS


ezgif.com-gif-maker-2.gif

INSTALLATION 

  1. Remove the old earphone tips from your earphones
  2. Take a single new Crystal Tip, angle it and insert the earphone nozzle into the core. Be careful not to tear the foam away from the core as this will reduce the life of the Crystal Tip
  3. Check to make sure that the Crystal Tip has been correctly installed by checking that the Crystal Tip is level on the earphone

ezgif.com-gif-maker-3.gif

USAGE

  1. Compress the foam with your fingertips by pressing on the foam, rotating the Crystal Tip and then pressing again. Ensure that you do not use your nails as they can tear the foam
  2. Gently insert the whole Crystal Tip into your ear and hold it in place for 5 - 10 seconds as the foam expands 
  3. You may want to open your jaw slightly when inserting the Crystal Tip
  4. Repeat the previous steps for the second earphone
  5. After initial use you may notice some cracks and flaking of the surface of the tip. This is nothing to worry about as it is just excess film coating being removed. A quick clean with the cleaning wipes provided will remove this excess

IMG_8385.jpg

MAINTENANCE

  1. Try to protect your Crystal Tips as much as possible i.e. try not to leave them loose in a rucksack 
  2. When the tips get dirty they can be cleaned using lens wipes